6ES7414-5HM06-0AB0 – SIMATIC S7-400 Series – SIEMENS

6ES7414-5HM06-0AB0 - SIMATIC S7-400 Series - SIEMENS

General information

Product type designation CPU 414-5H PN/DP
HW functional status 1
Firmware version V6.0

Product function

● Isochronous mode No

Engineering with

● Programming package As of STEP 7 V5.5 SP2 with HF1

CiR - Configuration in RUN

CiR synchronization time, basic load 100 ms
CiR synchronization time, time per I/O byte 0 µs

Supply voltage

Rated value (DC) Power supply via system power supply

Input current

from backplane bus 5 V DC, typ. 1.6 A
from backplane bus 5 V DC, max. 1.9 A
from backplane bus 24 V DC, max. 150 mA; 150 mA per DP interface
from interface 5 V DC, max. 90 mA; At each DP interface

Power loss

Power loss, typ. 7.5 W

Memory

Type of memory other

Work memory

● integrated 4 Mbyte
● integrated (for program) 2 Mbyte
● integrated (for data) 2 Mbyte
● expandable No

Load memory

● expandable FEPROM Yes; with Memory Card (FLASH)
● expandable FEPROM, max. 64 Mbyte
● integrated RAM, max. 512 kbyte
● expandable RAM Yes
● expandable RAM, max. 64 Mbyte

Backup

● present Yes
● with battery Yes; all data
● without battery No

Battery

Backup battery
● Backup current, typ. 180 µA; Valid up to 40°C
● Backup current, max. 1 000 µA
● Backup time, max. Dealt with in the module data manual with the secondary conditions and the
factors of influence
● Feeding of external backup voltage to CPU 5 V DC to 15 V DC

CPU processing times

for bit operations, typ. 18.75 ns
for word operations, typ. 18.75 ns
for fixed point arithmetic, typ. 18.75 ns
for floating point arithmetic, typ. 37.5 ns

CPU-blocks

DB

● Number, max. 6 000; Number range: 1 to 16000
● Size, max. 64 kbyte

FB

● Number, max. 3 000; Number range: 0 to 7999
● Size, max. 64 kbyte

FC

● Number, max. 3 000; Number range: 0 to 7999
● Size, max. 64 kbyte

OB

● Number, max. see instruction list
● Size, max. 64 kbyte
● Number of free cycle OBs 1; OB 1
● Number of time alarm OBs 4; OB 10-13
● Number of delay alarm OBs 4; OB 20-23
● Number of cyclic interrupt OBs 4; OB 32-35
● Number of process alarm OBs 4; OB 40-43
● Number of DPV1 alarm OBs 3; OB 55-57
● Number of startup OBs 2; OB 100, 102
● Number of asynchronous error OBs 9; OB 80-88
● Number of synchronous error OBs 2; OB 121, 12

Nesting depth

● per priority class 24
● additional within an error OB 1

Counters, timers and their retentivity

S7 counter

● Number 2 048

Retentivity

— adjustable Yes
— preset Z 0 to Z 7

Counting range

— lower limit 0
— upper limit 999

IEC counter

● present Yes
● Type SFB
● Number Unlimited (limited only by RAM capacity)

S7 times

● Number 2 048

Retentivity

— adjustable Yes
— preset No times retentive

Time range

— time range / of the S7 timers / initial value 10 ms
— time range / of the S7 timers / full-scale value 9 990 s

IEC timer

● present Yes
● Type SFB
● Number Unlimited (limited only by RAM capacity)

Data areas and their retentivity

Retentive data area (incl. timers, counters, flags), max. Total working and load memory (with backup battery)

Flag

● Size, max. 8 192 byte
● Retentivity available Yes
● Retentivity preset MB 0 to MB 15
● Number of clock memories 8; in 1 memory byte

Local data

● adjustable, max. 16 kbyte
● preset 8 kbyte

Address area

I/O address area

● Inputs 8 kbyte
● Outputs 8 kbyte

Process image

● Inputs, adjustable 8 kbyte
● Outputs, adjustable 8 kbyte
● Inputs, default 256 byte
● Outputs, default 256 byte
● consistent data, max. 244 byte
● Access to consistent data in process image Yes

Subprocess images

● Number of subprocess images, max. 15

Digital channels

● Inputs 65 536
— of which central 65 536
● Outputs 65 536
— of which central 65 536

Analog channels

● Inputs 4 096
— of which central 4 096
● Outputs 4 096
— of which central 4 096

Hardware configuration

Number of expansion units, max. 21
connectable OPs 63
Multicomputing No

Interface modules

● Number of connectable IMs (total), max. 6
● Number of connectable IM 460s, max. 6
● Number of connectable IM 463s, max. 4; Single mode only

Number of DP masters

● integrated 2
● via CP 10; CP 443-5 Extended
● Mixed mode IM + CP permitted No
● via interface module 0

Number of IO Controllers

● integrated 1
● via CP 0

Number of operable FMs and CPs (recommended)

● FM See manual Automation System S7-400H fault-tolerant systems. Limited by
number of slots and number of connections
● CP, PtP See manual Automation System S7-400H fault-tolerant systems. Limited by
number of slots and number of connections
● PROFIBUS and Ethernet CPs 14; Of which max. 10 CP as DP master

Slots

● required slots 2
Time of day

Clock

● Hardware clock (real-time) Yes
● retentive and synchronizable Yes
● Resolution 1 ms
● Deviation per day (buffered), max. 1.7 s; Power off